Changshu Shantang Rubber Co., Ltd.

■ Latest trends

■ Service center

Hotline：
86-512-52571946
(0)13906230962

Business fax：
86-512-52571962

Contact email：
st@strubber.com.cn

■ Customer area

■ Relevant specs

	Special rubber plate for computer laser engraving
	Monochrome rubber plate
	Compound rubber plate
	Dichromatic rubber plate
	Cloth reinforced oil resistant rubber plate
	Double-sided tape for printing industry
	Effect drawing of rubber plate for computer laser engraving
	Rubber products
	Rubber plate breakdown

　　Characteristics: oil-resistant, acid/alkali-resistant, wearable, even planeness, good absorbency, exquisite and pliable texture, smooth engraving, long service life, clear printing graphics and letters, strong sense of hierarchy. They are actually ideal plate making materials.
Can be one-side or double-side roughened and provide special specification depends on customer’s demands. Mailing or consigning for customers is offered. Users are wholeheartedly welcomed to contact business.
The company has been accredited for ISO9001:2000 international certification and applicable standard of the products is Q/320581BHW001-2006.

　Special rubber plate for computer laser engraving

　　Common spec sheet:

(L×W) mm	Thickness mm
580×820	4-9
2300×650
2300×950

Key technical parameters: (refer to only testing standard for 45 degree products)
　　1. Hardness (Shore): 45±5
　　2. Rupture hardness Mp≥4.5
　　3. Permanent set at rupture≤30
　　4. Elongation at rupture %≥450

Product characteristics:
　　1. Oil resistant, acidproof/alkaliproof, wearable, long service life;
　　2. Even planeness, good absorbency and elaborate printing;
　　3. Exquisite and pliable texture, smooth engraving and even planeness;
　　4. Outstanding printing effect, strong sense of hierarchy, can replace certain pliable plates;
　　5. Avoid as practicable as possible forme deformation, applicable especially to print small letters and patterns;
　　6. Excellent elasticity shall compensate uneven cardboard and ensure consistent printing quality on the spot.

　　Name: special engraving sheet material for single-layer computer laser engraving
　　Application: carton printing and computer laser engraving
　　Model: (Shore) hardness: 38-45 degree

　　Name: special engraving sheet material for double-layer computer laser engraving
　　Application: carton printing and computer laser engraving
　　Model: (Shore) hardness: 38-45 degree

∴TOP∴

　　Name: monochrome rubber plate
　　Application: carton printing
　　Model: (Shore) hardness 42-75 degree

　　Common spec sheet:

Sheet material (L×W) mm

Width of coiled material mm

Thickness mm

500×400

1200×650

550

2-9.6

580×820

1400×1100

650

600×450

2300×650

950

700×500

2300×950

1100

Key technical parameters: (refer to only testing standard for 65 degree products)
　　1. Hardness (Shore): 65±5
　　2. Rupture hardness Mp≥4.5
　　3. Permanent set at rupture≤30
　　4. Elongation at rupture %≥450

Product characteristics:
　　1. Oil resistant, acidproof/alkaliproof, wearable, long service life;
　　2. Even planeness, good absorbency and elaborate printing;
　　3. Exquisite and pliable texture, smooth engraving and even planeness;
　　4. Outstanding printing effect, strong sense of hierarchy, can replace certain pliable plates;
　　5. Avoid as practicable as possible forme deformation, applicable especially to print small letters and patterns;
　　6. Excellent elasticity shall compensate uneven cardboard and ensure consistent printing quality on the spot.

∴TOP∴

　　Name: dichromatic rubber plate
　　Application: plastic woven printing
　　Model: (Shore) hardness 65-75 degree

　　Common spec sheet:

Key technical parameters: (refer to only testing standard for 65 degree products)

Description	Red finishing	Back prime
Shore hardness	65±5	65±5
Rupture hardness Mp≥	3.0	2.0
Permanent set at rupture≤	25	20
Elongation at rupture %≥	450	260

Product characteristics:
　　1. Oil resistant, acidproof/alkaliproof, wearable, long service life;
　　2. Even planeness, good absorbency and elaborate printing;
　　3. Exquisite and pliable texture, smooth engraving and even planeness;
　　4. Avoid as practicable as possible forme deformation, applicable especially to print small letters and patterns.

　　Name: cloth reinforced oil resistant rubber plate
　　Application: plastic woven printing
　　Model: (Shore) hardness 65 degree

　　Common spec sheet:

Sheet material (L×W) mm

Width of coiled material mm

Thickness mm

580×820

550

4-7

1200×650

650

Product characteristics:
　　1. High content of oil resistant material, strong oil resistant and wearability, big printing quantity;
　　2. Even planeness, good absorbency and elaborate printing;
　　3. Exquisite and pliable texture, smooth engraving and even planeness;
　　4. Avoid as practicable as possible forme deformation, applicable especially to print small letters and patterns.

∴TOP∴

　　Name: compound rubber plate
　　Application: carton printing
　　Model: (Shore) hardness 42-75 degree

Common spec sheet:

Sheet material (L×W) mm	Width of coiled material mm	Thickness mm
700×500	550	4-7
1200×650	650
2300×650	1100
2300×950

Key technical parameters: (refer to only testing standard for 45 degree products)
　　1. Hardness (Shore): 45±5
　　2. Rupture hardness Mp≥4.5
　　3. Permanent set at rupture≤30
　　4. Elongation at rupture %≥450

Product characteristics:
　　1. Oil resistant, acidproof/alkaliproof, wearable, long service life;
　　2. Even planeness, good absorbency and elaborate printing;
　　3. Exquisite and pliable texture, smooth engraving and even planeness;
　　4. Outstanding printing effect, strong sense of hierarchy, can replace certain pliable plates;
　　5. Avoid as practicable as possible forme deformation, applicable especially to print small letters and patterns;
　　6. Excellent elasticity shall compensate uneven cardboard and ensure consistent printing quality on the spot.

∴TOP∴

Double-sided tape for printing industry
	Spec: 340mm×3m Packing: paper 28 rolls/case, gauze 40 rolls/case Characteristics: good adhesiveness, repeated use and quick advantages. Can used to affix and fix rubber forme of various thicknesses. Application: carton printing, plastic woven printing industry. Before using, the adhesive face shall be kept clear, clean and dry. Before storage, it shall not be affected by moisture, heating and direct sunshine.

∴TOP∴

Effect drawing of single-layer computer laser printing and engraving rubber plate

Effect drawing of double-layer computer laser printing and engraving rubber plate

∴TOP∴

Rubber products

Our company has such rubber products as rubber bridge bearings of various specs and rubber water stop of various specs and different demands.

Characteristics: excellent elasticity, wearable, compression resistant, tear resistant, aging resistant and acidproof/alkaliproof.

Products have been used in leak and seepage resistant, shock absorption and buffering of bridges and tunnels.

Spec sheet of rubber water stop

Code	Product spec (mm)	Product section
E1	290×10×R25
E2	300×6×R13
E11	300×8×R18
E12	280×8×R13
E13	280×9×R13.5
E14	270×15×R30×Φ35
E16	300×8×R20×6
E18	250×10×12.5×Φ10
E21	230×6×16
E31	250×10×R20Φ30
E41	290×10×R25
C1	300×10×R30
C2	220×10×R30
C3	230×10×R40
P1	90×15×R20
P2	120×15×R20
P3	140×15×R20
P4	45×6×Φ18
P5	55×10×Φ20

∴TOP∴

.Spec sheet for Shantang^TM series printing and engraving rubber plates

1. Monochrome rubber plate (sheet material category, computer laser engraving) (Shore) hardness 38-75 degree

Spec (mm) L×W	Spec (mm) L×W	Spec (mm) L×W	Spec (mm) L×W
500×400×2	600×450×5	820×580×5	2300×650×4
500×400×2.6	600×450×6	820×580×6	2300×650×5
500×400×3	600×450×7	820×580×7	2300×650×6
500×400×4	700×500×2	1200×650×4	2300×650×7
500×400×5	700×500×3	1200×650×5	2300×950×4
500×400×6	700×500×4	1200×650×6	2300×950×5
500×400×7	700×500×5	1200×650×7	2300×950×6
600×450×2	700×500×6	1400×1100×4	2300×950×7
600×450×2.6	700×500×7	1400×1100×5
600×450×3	820×580×3	1400×1100×6
600×450×4	820×580×4	1400×1100×7

2. Double-layer compound rubber plate (sheet material category, computer laser engraving) (Shore) hardness 38-75 degree. Finishing available are 1.5 1.6 1.8 2.0 mm

Spec (mm) L×W	Spec (mm) L×W	Spec (mm) L×W	Spec (mm) L×W
700×500×4	820×580×6	1400×1100×4	2300×650×6
700×500×5	820×580×7	1400×1100×5	2300×650×7
700×500×6	1200×650×4	1400×1100×6	2300×950×4
700×500×7	1200×650×5	1400×1100×7	2300×950×5
820×580×4	1200×650×6	2300×650×4	2300×950×6
820×580×5	1200×650×7	2300×650×5	2300×950×7

3. Monochrome rubber plate (coiled material category) (Shore) hardness 42-75 degree

Spec (mm) L×W	Spec (mm) L×W	Spec (mm) L×W	Spec (mm) L×W
W550×2	W650×3	W950×3	W1100×3
W550×2.6	W650×4	W950×4	W1100×4
W550×3	W650×5	W950×5	W1100×5
W550×4	W650×6	W950×6	W1100×6
W550×5	W650×7	W950×7	W1100×7
W550×6
W550×7

4. Double-layer compound rubber plate (coiled material category) (Shore) hardness 42-75 degree

Spec (mm) L×W	Spec (mm) L×W	Spec (mm) L×W
W550×4	W650×4	W950×4
W550×4	W650×5	W950×5
W550×4	W650×6	W950×6
W550×4	W650×7	W950×7

5. Dichromatic oil resistant rubber plate (Shore) hardness 65-75 degree (oil resistant level: common, medium, high and special high for cloth reinforced one)

Spec (mm) L×W	Spec (mm) L×W	Spec (mm) L×W
550×700	550	4-10
580×820	650
1200×650
2300×650
2300×950

6. Machining products of special specification, one-sided or double-sided coarse and/or fine roughening technology.

∴TOP∴

English autonym of this website: Shantang Rubber, printing and engraving rubber plat

Copyright © 2002- www.iklankomplit.com All rights reserved.

Changshu Shantang Rubber Co., Ltd.
蘇ICP備05022070號

公车上把腿张开让人摸